Chimney Systems

The DirectVent Pro 5" x 8" Galvanized DSA Flashing for Roof Pitch of 0/12 - 6/12 is a component that is used in a typical venting installation. The DuraVent dead soft aluminum flashing can be used...

  The DirectVent Pro Steep Roof Flashing is designed for those high-angled installations with roof pitches 7/12-12/12. Use to weather proof the penetration of vent pipe through the roof, Storm...

  The DirectVent Pro Steep Roof Flashing is designed for those high-angled installations with roof pitches 7/12-12/12. Use to weather proof the penetration of vent pipe through the roof, Storm...

The wall strap is used to support vent pipe. Provides 1" clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs.   Stunning design and Engineered Excellence® utilizing...

The attic insulation shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1" clearance to combustibles...

A ceiling fire stop is required for multi-story vertical installations at the second floor and any subsequent floors.   Stunning design and Engineered Excellence® utilizing state-of-the art manufac

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any...

  The DirectVent Pro Wall Firestop is designed for horizontal (through-wall) installations. Refer to the appliance manufacturer's installation instructions for requirements.   Stunning design...

  The DirectVent Pro Wall Thimble provides a complete wall-pass-through and firestop and is designed for Square Horizontal Caps only.    Stunning design and Engineered Excellence® utilizing...

When a direct vent pipe must pass through a ceiling, it requires a ceiling support box that serves as the bottom support for the entire installation. This support box has an adjustable feature that...

Provides pipe support for flat ceiling direct vent installations. Decorative cover for Wall Thimble. Black finish. Insulated to prevent air leakage. Approved for use with most direct vent appliances.

  The DirectVent Pro 90° Elbow features a fully unitized twist-lock construction. All elbows include a swivel, allowing the lock to remain fully engaged, while aligning the elbow in the desired...