Chimney Systems

  DuraTech Adjustable Wall Strap 6” Diameter   Use in interior or exterior installations to add lateral support to the chimney. Assures a 2” to 6” clearance to combustible walls. Required every 8’.   Stainless...

Required when terminating a chimney above the roof. Spark arrestor screen available but not included.   Stainless Steel inner and out shell. Stock Photo Applications5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood...

Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

Dead Soft Aluminum Flashing Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance...

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

An Extended Roof Bracket is used to support the chimney when it extends more than 5' above the roof. It provides stability to the chimney against wind and snow. Mounting brackets and adjustable tubing is included. Applications5"-8" DuraTech is a...

5" & 6" DuraTech Aluminum Storm Collar 5DT-SC Applications5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas,...

An Attic Insulation Shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. The Attic Insulation Shield fits over the Firestop Radiation Shield or a support box and consists of...

The Firestop Radiation Shield is installed where a chimney passes through a floor or ceiling without the use of a support box. It is used to center the pipe and assure the proper clearance required for the installation. The Firestop Radiation Shield...

The DuraTech Anchor Plate is used to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with the zero-clearance fireplace manufacturer to ensure that DuraTech Chimney is an approved installation method. Applications5"-8" DuraTech is...

New integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble. Provides...